Koh Young

Auto Repair System

Extending the ‘Golden Hour’ in your Assembly Line:

To Repair or Not?

The first hour after the occurrence of a traumatic injury, or the “Golden Hour”, is considered by trauma surgeons to be the most critical time for successful emergency treatment. It may not be the same life or death situation, but it is similar in an SMT assembly line, where a few minutes of downtime can cost millions of dollars. Yet the Golden Hour concept does exist in the SMT production process.

It is widely recognized that over 70 percent of soldering defects are associated with the solder paste printing process.[1] These defects pose serious concerns to the industry, especially with the component miniaturization trend and the 0201M microchip emergence. Manufacturers cannot scrap the board and the microchip, due to procurement challenges and component costs. However, if the manufacturer does not repair the issue quickly, the whole board is susceptible to failure. Leading inspection suppliers like Koh Young Technology are working diligently to extend the “Golden Hour” well beyond its limit by implementing new innovations like integrated tools to repair defective solder depositions.

Need for the Correct Solder Volume

What is ideal amount of solder to deposit? It may be different for too much solder paste will cause solder bridging, whereas insufficient solder paste may result in printing defects like bridges, tombstones, and more. With the widespread use of leadless packaging, insufficient solder volume is an increasingly frequent defect occurring, because solder paste tends clog smaller apertures and cannot be released onto the pad. Rework innovations can help solve insufficient solder issues.

Rework Applications

The rework application can be categorized into two types: traditional, needle-based contact dispensing and non-contact jetting. Both methods have advantages, as well as limitations. As shown in Figure 1, needle-based dispensing is suitable for many package types, including Ball Grid Array (BGA) packages. However, the system needs to maintain a constant z-axis distance between the substrate and needle tip. An inconsistent distance reduces repeatability and accuracy. Non-contact jetting, another relatively new method, has superior dispensing speed but, it is less flexible due to the limited number of certified solder paste for jetting.

[1] Mitch Holtzer, Karen Tellesfen, Westin Bent, Predicting Solder Paste Transfer Efficiency and Print Volume 2017

  Figure 1: Recommended deposition method based on package type  [1]      [1]   Fernando Coma, Jeffrey Kennedy & Thilo Sack. (2015) Deposition of Solder Paste into High Density Cavity Assemblies [PowerPoint slides] Retrieved from https://www.smta.org/chapters/files/April-2015-Kennedy.pdf

Figure 1: Recommended deposition method based on package type[1]

[1] Fernando Coma, Jeffrey Kennedy & Thilo Sack. (2015) Deposition of Solder Paste into High Density Cavity Assemblies [PowerPoint slides] Retrieved from https://www.smta.org/chapters/files/April-2015-Kennedy.pdf

Automated Dispensing with Advanced Accuracy

Today’s production environments need equipment that is both flexible and easy to use. Koh Young meets the industry’s needs by adding a new “Auto Repair” dispensing system to its high-speed KY8030-3 3D SPI (solder paste inspection) platform. The Koh Young Auto Repair system replaces mechanical height sensors with a laser sensor to accurately measure the z-axis distance and overcome the challenge of traditional dispensing. This innovative sensor method provides excellent Gage R&R capability. (Figure 2)

 
  Figure 2: Koh Young’s Volume & Area Repeatability Results (each test was run independently 50 times)

Figure 2: Koh Young’s Volume & Area Repeatability Results (each test was run independently 50 times)

  (each test was run independently 50 times)

(each test was run independently 50 times)

 

The Koh Young 3D SPI system can accurately inspect and identify solder defects, thanks in part, to its precisely engineered mechanical structure. Unlike other 3D SPI systems that move during the measurement process, the Koh Young SPI uses “stop and shoot” technique. Unwanted vibration and image stitching is eliminated. Auto Repair, when added to the high-speed KY8030-3 is truly the solution for production today and in the future.

Minimal Maintenance

Koh Young has examined system maintenance and usability during the Auto Repair system development. The Koh Young Auto Repair system, unlike other dispensing technologies does not use a plunger to dispense solder paste. The plunger can crush the solder particles and clog the nozzle. Instead, the integrated Auto Repair dispenser uses air pressure, which reduces wear and increases nozzle longevity. It also significantly extends the service interval to upwards of seven days. When cleaning is needed, the syringe holder incorporates a one-touch release for fast and easy replacement. These minimal maintenance requirements improve the Return on Investment (ROI) by reducing labor and material costs.

Superior Flexibility

Does the Koh Young Auto Repair system offer other benefits? Yes. The design is highly flexible and considers many production variables. For example, imagine a hundred different board layouts with different components - each component type requires a unique  solder paste amount. The Auto Repair system can be an effective solution, especially for small BGAs and microchips. (Figure 3) It can dispense solder to repair insufficient errors to a wide range of component sizes, including 0402M microchips with a pad-to-pad distance over 100um. Additionally, Dynamic Z-Axis Tracking automatically adjusts the distance between the head and the board surface to maintain the ideal focal range and prevent false calls due to PCB warp. Such flexibility allows users to readily improve yields and efficiency in their assembly lines.

 
  Figure 3: Before and After Comparison of the Koh Young Auto Repair System

Figure 3: Before and After Comparison of the Koh Young Auto Repair System

 

Smart Factory Future

Looking forward, Industry 4.0 is rapidly gaining traction among manufacturers. The factory is not a static place, it is a dynamic zone where machines work together to execute complex tasks. In fact, the Koh Young’s Auto Repair system already addresses Industry 4.0 in many aspects. By integrating 3D inspection and repair, it establishes a closed-loop process and eliminates unnecessary board cleaning or scrap. Additionally, it integrates a real-time process dashboard, so operators can quickly verify rework performance and make the right decisions by comparing with previous results.

What is next for the Auto Repair system in a future smart factory? In the ideal future the a connected systems should remove inefficiency from the start, so there may not be anything to repair. Will manufacturers still need an Auto Repair system? The answer may be “yes,” as this is not going to happen in near future. Indeed, the smart factory will not replace rework applications, instead it will enhance the functionality. Auto Repair powered by AI may be able to recognize complex patterns of solder pads, synthesize information, draw conclusions, and provide recommendations to optimize the solder paste printing process.

Conclusion

The printing process is one of the most critical steps in the SMT assembly line, because it is the origin for most of the process defects. The benefits of readily repairing printing defects extend far beyond the cost savings from eliminating cleaning, post-reflow rework, and scrap. As rework costs and complexity increases, the ability to extend the “Golden Hour” with Auto Repair system will increase line productivity and yield.

As the absolute No.1 market and technology leader, Koh Young has been developing innovative solutions to overcome industry challenges, expand process capabilities, and boost factory performance. To this end, the company has set up three additional R&D centers to facilitate a quantum leap in technological leadership and competitiveness. Koh Young continues to integrate AI advancements in many of its systems, while overcoming Golden Hour challenge and paving the way for new markets and industries beyond SMT.